-
DOOR FRAME METAL DETECTOR
➢TECHNICAL SPECIFICATIONS
TECHNOLOGY: Pulse induction
➢SELF DIAGNOSTICS:
User friendly self-testing diagnostics to identify faulty conditions. Informs error codes. CONTROL PANEL: Easily accessible, modular design with standard plugs & connectors. 4 Digit Password & lockable key protection from any unauthorized usage..
➢CONSTRUCTION:
Lightweight, Rigid, laminated side panels and cross piece, ABS Plastic boots for panel protection, Base wheels for easy mobility. Water proof /weatherproof and usable at outdoor locations. ZONES: 3 (Three), Pin point detection with LED’s on both panels..
➢FREQUENCY:
User Selectable Operational Frequencies.
➢SENSITIVITY:
Each Individual zone sensitivity Adjustable.
➢DETECTION:
Detects all Ferrous, on-ferrous, Ferrite & Alloys, Uniformly in entire frame area, in all orientation & speeds. Detection at correct zone levels without interference/ false identification of adjacent zone. Conforming fully to IS specifications.
➢ALARM SIGNAL:
Audible alarm differentiating between ferrous & Non ferrous metals. Alpha numeric display & zone display. FALSE ALARM RATE: Less than 1 %..
-
HAND HELD METAL DETECTOR
BODY SCANNING METAL DETECTOR SPECIFICATION:
➢Power:9V (6F22) standard
➢Detection distance,The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be detected. Typical performance figures are given below: Pin: 30-60mm One coin: 75-100mm 6 inches knife: 160-180mm 64model hand gun: 180-195mm
➢ Frequency:35KHz
➢Alarming mode:Alarming with buzzer & LED, and vibration synchronized
➢Voltage:9V (6F22)
➢Weight:225G (without battery)
➢Size:40(L) ×8(W) × 4(H)cm
-
GARRETT SUPERSCANNER HAND-HELD METAL DETECTOR SPECIFICATION:
➢ Operating frequency:93 kHz
➢Audio frequency:2 kHz, Warble
➢ Operating temperatures:-37°C to 70°C)
➢Humidity:to 95% no condensing
➢Width:3.25″ ( 8.3 cm )
➢Thickness:1.625″ ( 4.13 cm )
➢Length:16.5″( 42 cm )
➢Weight:450 g
-
Hand held Metal Detector with Sound & Vibration Alarm Mode SPECIFICATION:
➢Operating Temperatures:-35°F (-37°C) to 158°F (70°C)
➢Water and Dust:Meets IEC 529 IP66 standards
➢ Operating Frequency:95 kHz
➢Audio Frequency:2kHz
➢Tuning: Automatic
➢Indicators:Silent / Vibrate
➢LED Alert Lights: Green – Power ON Amber – Battery LOW Red – ALARM condition
-
Garrett Thd Tactical Hand-Held Metal Detector SPECIFICATION:
➢INDICATORS
.Solid yellow LED: AL – target detected
.Flashing green LED: Pw – power on
.Flashing red LED: BT – low battery indicator
➢ALARM SIGNAL
Sound mode: Buzzer with red LED
Vibration mode: Vibrator with red LED
➢CONTROL
.3 way switch
.Forward position: S – sound on
.Center position: O – power off
.Back position: V – vibration on
➢BATTERY
.Single 9 volt alkaline or ni-cd
.Battery life:30 to 40 hours (ni-cd)
.28 hours (alkaline)
.Dimension Weight:6.88 ounces (195g)
.Length:14.76″ (375mm)
.Width:3.03″ (77mm)
.Thickness:1.02″ (26mm)
-
HANDHELD METAL DETECTOR WITH ADJUSTABLE SENSITIVITY AND VIBRATION ALERT SPECIFICATION
➢Operating Frequency:20KHz
➢Detection distance Pin: 30-60mm 64 model handgun:150mm 6 inch long knife:160mm
➢ Diameter 20mm Steel Ball:90mm
➢Power Source: 1x 9V Battery
➢Adjustment method:Manual
➢Alarm mode:Audible beep or vibration alert
➢Color: Black
➢Dimensions:440 X 55 X 145mm
-
DOOR FRAME METAL DETECTOR
DOOR FRAME METAL DETECTOR
➢TECHNICAL SPECIFICATIONS
TECHNOLOGY: Pulse induction
➢SELF DIAGNOSTICS:
User friendly self-testing diagnostics to identify faulty conditions. Informs error codes. CONTROL PANEL: Easily accessible, modular design with standard plugs & connectors. 4 Digit Password & lockable key protection from any unauthorized usage..
➢CONSTRUCTION:
Lightweight, Rigid, laminated side panels and cross piece, ABS Plastic boots for panel protection, Base wheels for easy mobility. Water proof /weatherproof and usable at outdoor locations. ZONES: 3 (Three), Pin point detection with LED’s on both panels..
➢FREQUENCY:
User Selectable Operational Frequencies.
➢SENSITIVITY:
Each Individual zone sensitivity Adjustable.
➢DETECTION:
Detects all Ferrous, on-ferrous, Ferrite & Alloys, Uniformly in entire frame area, in all orientation & speeds. Detection at correct zone levels without interference/ false identification of adjacent zone. Conforming fully to IS specifications.
➢ALARM SIGNAL:
Audible alarm differentiating between ferrous & Non ferrous metals. Alpha numeric display & zone display. FALSE ALARM RATE: Less than 1 %..
